Products
Plastic housing is economical. With a sensitivity adjustment knob, making the adjustment simple and easy. Amplifier built-in, action and reset time are under 1ms. Short circuit protection and power polarity protection. Action mode can be selected through the control line.
Slot width 5mm, tiny size. Various shapes (K,L,T,Y,R,F type) suitable for many different applications. Two modes of action, light-on and dark-on, can be switched. Multi-angle indicator for clearer display. With short circuit protection and power supply polarity protection. Wide supply voltage, DC5-24V, can be connected to different loads. Amplifier built-in, the fastest action, reset time up to 0.5ms. Widely used in a variety of precision machinery control.
Advanced optical system enables detection distance up to 2m. With background masking function, not affected by the color of the background object. Visible red LED light source for fast and accurate alignment of the detected object. With sensitivity adjustment and Indicator. High quality detection ability and high detection sensitivity. With short circuit protection and power polarity protection. Action reset response time is 1ms. Excellent anti-interference function can be two sets of close installation.
The sturdy metal casing can be used in harsh working environments. High-quality optical design with powerful features. The product has passed the explosion-proof certification of the National Low Voltage Explosion-proof Electrical Quality Inspection and Testing Center. Explosion proof certificate EX MB IIC T6 GB; EX MB IIIC T80 ℃ DB. Certificate Number: CLEX23.4689X Compliant with explosion-proof standards: GB/T3836.1-2021 Explosive Atmosphere Part 1 General Requirements for Equipment. GB/T3836.9-2021 Explosive Atmosphere Part 9 Equipment protected by rubber seal type "M". Usage environment: Zone 1, Zone 2, Zone 21, Zone 22 hazardous areas. The amplifier is embedded, and the action and reset time are both below 1ms. It has short-circuit protection and power polarity protection. The action mode can be selected through the control line.
Plastic housing is economical. M18 plastic threaded housing, shorter and smaller in size, easy to install and adjust. With sensitivity adjustment knob, make the adjustment simple and easy. Amplifier built-in, action and reset time are below 1ms. With short circuit protection and power supply polarity protection. Anti-mutual interference function, can be 2 sets of close installation.
Cylindrical metal thread, profile M18, easy to install and adjust. Sturdy metal housing can be applied in harsh working environment. Equipped with a sensitivity adjustment knob to make adjustment simple and easy. 0-10VDC or 4-20mA analog output. Amplifier built-in, action and reset time are under 1ms. With short circuit protection and power polarity protection.
Ultra small size can be installed in narrow spaces. The ultra small size is only W7xH9.5xD18.5mm. Equipped with sensitivity adjustment and action indicator light. Capable of long-distance detection. High quality detection capability and high detection sensitivity. It has short-circuit protection and power polarity protection. The corresponding time for action reset is 1ms.
Powerful function, integrating color detection and color mark detection. Ultra long detection distance, up to 500mm. The size of the light spot can be adjusted. More accurate detection. Coaxial detection method, more accurate. Product jitter tolerance or unevenness can be reliably detected. The color mark and background light input can be accurately displayed through a 4-digit red digital display. Built in delay function, signal on delay, signal off delay, and signal on/off dual delay. The sensitivity setting is simple, with 2-point setting in color mark mode and 1-point setting in color mode, allowing for easy setting, arbitrary fine-tuning, and more precise settings. Ultra high response speed, color mark detection up to 200us, color detection up to 160us.
Digital Intelligent Type KM Color sensor
Powerful function, integrating color detection and color mark detection. RGB red, green, and blue LED light sources provide more detailed color resolution. The extremely fine light spot of 1 × 5mm enables high-precision detection. Coaxial detection method, more accurate. In the color mark mode, the best color light source is automatically selected based on the comparison between the color mark and the background color. The color mark and background light input can be accurately displayed through a 4-digit red digital display. Built in delay function, signal on delay, signal off delay, and signal on/off dual delay. The sensitivity setting is simple, with a 2-point setting for color code mark and a 1-point setting for color mark. It can achieve simple settings, arbitrary fine-tuning, and more precise settings. High response speed, color mark detection up to 50us, color detection up to 130us.
coron@twcoron.com CORON
Address
No.166 Wutongyuan, Jinghe Sub-district, Dongxihu District, Wuhan, Hubei, China
Copyright©2024 Chaorong Electronics (Wuhan) Co., Ltd. Website Construction:xinnet